Bearings, motors, PLCs: the verified equivalent.
For your maintenance, your machines or your distribution catalog, we source components from Chinese manufacturers, under their brand or yours, and verify that they fit, work and last like the reference they replace.
- Reply within 2 business days
- No commitment
- NDA on request
A cheap component gets expensive the moment it stops a line.
A bearing that overheats, a gearbox that leaks, a motor whose actual efficiency is below its nameplate rating, a valve whose test pressure was never verified: the component is a small line on the invoice and a big one on production downtime.
Our teams, as close to the factories as possible.
We start from your product (SKU), your drawing or a sample: standardized dimensions, precision class, material, ingress protection rating, voltage, performance curves. We select specialized manufacturers, notably in the Wenling and Wenzhou (Zhejiang) manufacturing hubs for pumps, valves and compressors, and in Weifang (Shandong) for diesel engines. We offer equivalents under the manufacturer's brand or yours, never a counterfeit. First batches are measured and tested (noise and vibration, pressure, sealing, efficiency), then every production run is inspected and traced by batch.
What we source in this category.
- Bearings and bearing housings
- Gearboxes and gearmotors
- Electric motors and servo motors
- Hydraulic cylinders and power units
- Centrifugal, submersible and metering pumps
- Industrial valves and fittings
- Air compressors and dryers
- PLCs, operator panels and variable frequency drives
- Sensors, encoders and industrial vision
- Pneumatic cylinders and valves
- Hydraulic hoses and fittings
- Industrial tubes, flanges and fittings
- Belts, chains and sprockets
- Couplings, drive shafts and brakes
- Linear guides and ball screws
- Industrial diesel and gasoline engines
- Pressure gauges, flow meters and industrial scales
- Gaskets and mechanical seals
What we take care of.
Standardized dimensions (ISO, DIN), precision class, clearance, material and treatment compared against the reference; trial fitting on your machine if needed.
IE3 and IE4 efficiency classes, ingress protection rating, insulation class, CE, UKCA, UL or CSA; no-load and on-load testing.
Working and test pressures, oil cleanliness (ISO 4406), hoses and fittings (EN 853, SAE J517), leak testing.
Measured flow-pressure curves, Pressure Equipment and ATEX certificates verified, wetted materials checked.
PLCs, screens, drives and sensors: origin, software version and compatibility with your installed base verified before ordering.
Batch marking, certificates included, safety stock and scheduled replenishment for maintenance and distribution.
How we work.
Product (SKU) & usage
Original product (SKU)s, drawings or samples, service conditions, annual volumes and desired stock level.
Specialized manufacturers
Shortlisting by component family, audit of production and testing capabilities, side-by-side quotes.
Samples & testing
Dimensional measurements, performance and endurance tests, test assembly, written validation.
Production runs & replenishment
Batch inspection, certificates included, consolidation in China with your other purchases, scheduled replenishments.
Frequently asked questions.
Do you supply major-brand parts?
We source components from Chinese manufacturers, under their brand or yours, with equivalent dimensions and performance. We do not supply branded copies without authorization; for an original-brand component, go through its official network.
Can you take over an entire maintenance list?
Yes: send us your products and your annual consumption. We propose an equivalent for each line, have the critical parts tested and consolidate everything into a single container.
Are motors and pumps suitable for North America?
Yes, if voltage, 60 Hz frequency and UL or CSA listings are planned from the time of order; we verify them on the sample and on the certificates.
What are the minimum volumes?
For catalog components, a few cartons are often enough; for a specific part, the threshold depends on tooling. We group your products to reach factory minimums.
What rules apply to these products?
The market is also crowded with copies of major brands, and each family has its own rules: IE3 and IE4 motor efficiency classes in the EU (Regulation 2019/1781), the Pressure Equipment Directive for valves and tanks, ATEX for explosive atmospheres, UL or CSA listings for North America.
In the same family, other categories.
Build-to-print parts
To drawing or to sample: machining, injection molding, casting, sheet metal, boilermaking, from first article to series production.
View the categoryIndustrial machinery
Machine tools, presses, robots, process lines or turnkey plants, tested and accepted before departure.
View the categoryRaw materials
Steel, aluminum, plastics, composites, wood panels, magnets: material certificates and anti-dumping measures verified.
View the categoryA product to manufacture? Get an initial costed analysis.
Describe your product and volumes: a project manager from your industry replies with feasibility, the relevant manufacturing hubs and an indicative landed cost.
- Reply within 2 business days
- NDA on request
- Dedicated project manager